XT High Torque Motor 22TPA (Short With Fan)

£33.00
Availability: Out Of Stock0
Brand: XT
Product Code: XTM2
Product viewed: 5072

New 22TPA motor with a vented case that uses a small internal plastic fan just below the commutator that reduces overall heat by around 10% and offers a 30% faster cool-down time (when compared to non-vented 22TPA motors, see video). 

All parts of the motor, except the armature, are identical to the SHS High Torque motor.  What I like about this design is how easy the motors are to disassemble, making them easier to clean.  Uses a SHS D-type pinion.  22TPA motors generally use less energy making your battery last longer.  They don't run as fast as 16TPA or 14TPA motors but they produce less heat.  Ideally paired with a set of 12:1 or 13:1 gears for a standard build or with 18:1 for a DMR build.

**** PRODUCT ADVISORY: Over the years I've had reports of Gate Titan's causing motor slow down / damage when Adaptive Breaking is used.  It's happened on ZCI, SHS and Rocket motors in the past.  Only ever seems to be with Gate but I suspect any amount of heavy AB use with have the same affect.  My advice would be to only ever use AB as a last resort.  Try to fix your overspin issue mechically, i.e. short stroke, 7.4v battery etc.  Use at your own risk.

Motor Specifications:
- No load 11.1v:
Speed: 24,500rpm (+10%)
Current: 3A

- Load 11.1v:
Speed: 21,000 (+10%)
Current: 16A

- Torque: 575 g-cm
- Magnet: N38SH

Additional Features:
- D type SHS pinion
- Neodymium magnets
- End bell bearing
- Motor shaft bearing
- Aluminium shaft
- Screw attached plastic end bell (easier to dissemble)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:    Bad            Good

Captcha