New 22TPA motor with a vented case that uses a small internal plastic fan just below the commutator that reduces overall heat by around 10% and offers a 30% faster cool-down time (when compared to non-vented 22TPA motors, see video).
All parts of the motor, except the armature, are identical to the SHS High Torque motor. What I like about this design is how easy the motors are to disassemble, making them easier to clean. Uses a SHS D-type pinion. 22TPA motors generally use less energy making your battery last longer. They don't run as fast as 16TPA or 14TPA motors but they produce less heat. Ideally paired with a set of 12:1 or 13:1 gears for a standard build or with 18:1 for a DMR build.
Mosfet Active Break functionality can reduce the life of a motor. Of all the cases I've seen or heard about they generally involve a Gate Titan. Please keep this in mind when planning a build.
- D type SHS pinion
- No load RPM with 11.1v: 25,000
- Load current with 11.1v / M110 / 12:1 Gears: 12A
- Neodymium magnets
- End bell bearing
- Motor shaft bearing
- Aluminium shaft
- Screw attached plastic end bell (easier to dissemble)